EFHW Antenna Length Calculator

Change any value to update the related calculations.

Antenna type

Results

What is an EFHW antenna length calculator?

An EFHW antenna length calculator determines the ideal electrical length for an End Fed Half Wave antenna from its operating frequency. An EFHW antenna is designed around a half-wavelength of wire, with the feed point located at one end of the antenna.

Enter an operating frequency to calculate the ideal wavelength and half wave antenna length. The calculator can display the result in metric or imperial units.

How to use the EFHW antenna length calculator

Enter the frequency you want the EFHW antenna to operate at. The calculator automatically determines the wavelength and half wave length.

You can also select quarter wave or full wave as reference lengths. Each result has its own unit selector, so you can switch between metric and imperial units.

How is EFHW antenna length calculated?

EFHW antenna length is based on the wavelength of the radio signal. Wavelength is calculated from frequency using the speed of light:

Wavelength = c / f

Where:

  • c is the speed of light, 299,792,458 meters per second.
  • f is the frequency in hertz.

An ideal End Fed Half Wave antenna uses approximately one-half wavelength of electrical length:

EFHW length: Wavelength / 2
Quarter wave: Wavelength / 4
Full wave: Wavelength

EFHW antenna length chart by frequency

Use this EFHW antenna length chart to find ideal half wave antenna lengths for common HF frequencies.

EFHW antenna length by frequency
Frequency¼ Wave½ WaveFull Wave
3.5 MHz21.41 m42.83 m85.65 m
3.8 MHz19.72 m39.45 m78.89 m
7.2 MHz10.41 m20.82 m41.64 m
10.1 MHz7.42 m14.84 m29.68 m
14.2 MHz5.28 m10.56 m21.11 m
18.1 MHz4.14 m8.29 m16.56 m
21.3 MHz3.52 m7.04 m14.07 m
24.9 MHz3.01 m6.02 m12.04 m
28.4 MHz2.64 m5.28 m10.56 m
29.0 MHz2.59 m5.17 m10.34 m

These are ideal electrical lengths calculated from wavelength. Actual EFHW wire lengths can differ because of insulation, conductor diameter, end effects, mounting, nearby objects, and the overall antenna system.

What is an End Fed Half Wave antenna?

An End Fed Half Wave antenna, commonly called an EFHW, is a wire antenna designed to operate as an approximately half-wavelength radiator. Unlike a conventional center-fed dipole, the feed point is located near one end of the wire.

EFHW antennas are popular for portable and field operations because a single length of wire can be installed in several practical configurations.

EFHW antenna length vs frequency

As frequency increases, the wavelength decreases, so the ideal EFHW wire length also becomes shorter.

For example, an ideal half wave at 7.2 MHz is approximately 20.82 meters long, while an ideal half wave at 14.2 MHz is approximately 10.56 meters.

This relationship allows the same basic antenna design principles to be applied across different HF bands.

EFHW antenna length example at 14.2 MHz

At 14.2 MHz, the wavelength is approximately21.11 m. An ideal half wave length is approximately10.56 m.

¼ wavelength5.28 m
½ wavelength10.56 m
Full wavelength21.11 m

These values represent ideal electrical dimensions. The final wire length used for an actual EFHW antenna may need to be adjusted during installation and tuning.

Why actual EFHW wire length can be different

The ideal half wave calculation provides a starting point, not necessarily the final physical wire length. The actual resonant length can be affected by wire insulation, conductor diameter, the antenna's physical shape, mounting height, nearby objects, and the rest of the antenna system.

EFHW antennas also commonly use a matching transformer or matching network at the feed point. The complete antenna system, rather than the wire alone, determines the final operating characteristics.

Frequently asked questions

How long is an EFHW antenna at 14.2 MHz?

The ideal half wave length at 14.2 MHz is approximately 10.56 meters. The physical wire used in practice may need to be adjusted during installation and tuning.

How do I calculate EFHW antenna length?

First calculate the wavelength usingWavelength = c / f. Then divide the wavelength by two to obtain the ideal half-wave electrical length.

What is the ideal length of an EFHW antenna?

An EFHW antenna is designed around approximately one-half wavelength of electrical length. The exact physical wire length depends on the frequency and the construction of the antenna.

Can one EFHW antenna work on multiple bands?

Yes. An EFHW can be designed or operated to cover multiple amateur radio bands, depending on the wire length, matching system, installation, and other design choices.

Is an EFHW the same as a half wave dipole?

Both are based on approximately half a wavelength of electrical length, but their feed arrangements are different. A conventional dipole is center-fed, while an EFHW is fed near one end.

What is the difference between wavelength and antenna length?

Wavelength describes the physical distance represented by one complete cycle of a radio wave. Antenna length describes the electrical length used by a particular antenna design and may represent a fraction of the wavelength.

Can I calculate EFHW antenna length in feet?

Yes. The calculator lets you switch the antenna length and wavelength results between metric and imperial units.

Related Antenna Length Calculators

Explore related antenna length calculators for different antenna types, frequency ranges, and radio applications. Each calculator provides antenna length, wavelength, and related dimensions based on frequency.

Related Antenna Length Calculators

Explore related antenna length calculators for different antenna types, frequency ranges, and radio applications. Each calculator provides antenna length, wavelength, and related dimensions based on frequency.